Kitchen Cabinet Installation – Step-By-Step Instructions on How to Install Kitchen Cabinets Yourself

Since you have your new kitchen cupboards, you are prepared to continue on to the following enormous step…..Installing your kitchen cupboards. While the real establishment of the Kitchen Cabinets isn’tall that hard, the basic initial step is apportioning and stamping where the cupboards will go. By putting design markings on the dividers and floors, it won’t just assist you with kitchen cupboard situation and stud areas, however it will likewise assist you with finding where changes and shims will be required. Before we begin traditional kitchen there are a few things that you will require for the undertaking:


Level or Laser Level


Measuring tape

Stud Finder


1″ x 3″ Piece of timber (6′- 8′ long) or an Inverted U-formed edge (see notes underneath)


Screws (adequately long to go 1/2 into the studs)

Utility blade or etch

Checking Compass

An additional an arrangement of hands (you might need to pay off one of your companions)

As I referenced above, you have the choice of utilizing a piece of 1′ x 3′ blunder for the establishment or building an edge to help the cupboards (I have incorporated an image of an example outline beneath). This can be made out of 2′ x 4’s and ought to be adequately tall to help the lower part of your divider cupboards. On the off chance that you anticipate introducing more than one kitchen, I would recommend the edge, however a piece of wood will do fine and dandy in case this is a one time occasion. Regardless, you will require one more arrangement of hands to assist with the establishment.

For this situation we purchased (RTA) Ready-To-Assemble Kitchen Cabinets from RTA Kitchen and Bathroom Cabinet Store. Presently the kitchen cupboards are collected, we are prepared to begin checking out our design lines. Certain individuals start with the base cupboards, however we will begin with the divider cupboards first. There is no correct way of beginning, I simply really like to begin with the upper cupboards first.

1. Utilize a level and a pencil to define an equal boundary across the divider around 3 creeps up from the floor. Measure down from this line, to the floor, and find the floors high point (on the off chance that it has one), and imprint a line by then. From that high point, Measure up 34 1/2 inches and define a level boundary across the divider to assign the highest point of the base cupboards.